Product ID:MICROTRAK REAGENTS,ADVANCE REAGENTS
MSDS Date:04/24/1986
FSC:6550
NIIN:00N010872
MSDS Number: BJJQX

SYVA (A SYNTEX COMPANY)

PALO ALTO, CA 94303

Emergency Phone: 408-446-9966

Info Phone: 408-446-9966

Cage: HO623

SYVA CO, A SYNTEX CO

SAN JOSE, CA 95161-9013 US

Telephone: 408-239-2000

Cage: 61815

SODIUM AZIDE (SARA III)

CAS: 26628-22-8

RTECS: VY8050000

OSHA PEL S, C 0.1 PPM(HN3)

ACGIH TLV: C 0.11 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FLUORESCEIN-LABELED PURIFIED MURINE MONOCLONAL ANTIBODIES

OSHA PEL N/K

ACGIH TLV: N/K

EVANS BLUE COUNTERSTAIN

OSHA PEL N/K

ACGIH TLV: N/K

PROTEIN-STABILIZED BUFFER

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF OVEREXPOSURE
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION SHOULD NOT
OCCUR.SKIN:IRRITATION SHOULD NOT OCCUR.INGESTION:N/K
.INHALATION:N/K .
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:FLUSH THOROUGHLY WITH COPIOUS AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES.SKIN:WASH WELL WITH SOAP AND
WATER.INGESTION:SHOULD NOT OCCUR WITH NORMAL USE.IN THE EVENT OF
ACCIDENTAL INGESTION,INDUCE VO MITING AND CONTACT SUPERVISOR AND
PHYSICIAN.INHALATION:SHOULD NOT OCCUR WITH NORMAL USE.IN THE EVENT
OF ACCIDENTAL INHALATION,CONTACT SUPERVISOR AND PHYSICIAN.

Flash Point:SOLID
Extinguishing Media:WATER
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:CARBON
DIOXIDE AND CARBON MONOXIDE.

Spill Release Procedures:ABSORB SOLUTION W/ DRY MATL.WET POWDER TO
AVOID DUST GENERATION & COLLECT/ABSORB.REMOVE SOLNS W/ SODIUM AZIDE
FROM CONTACT W/ METALS.PERSONAL PROT MAY BE NEC.IF SODIUM AZIDE
SOLNS ENTER DRAINS,FLUSH W / PLENTY OF WATER TO AVOID METAL AZIDE
BUILDUP.
Neutralizing Agent:N/K

Handling and Storage Precautions:NONE
Other Precautions:CONTAINS SODIUM AZIDE AS A PRESERVATIVE.MAY REACT
WITH METALS TO FORM EXPLOSIVE COMPOUNDS.AVOID PROLONGED CONTACT
WITH METALS.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:LATEX
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K
Work Hygienic Practices:N/K
Supplemental Safety and Health
ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .

Decomp Temp:Decomp Text:N/K
Vapor Pres:SOLID
Vapor Density:SOLID
Spec Gravity:SOLID
Evaporation Rate & Reference:SOLID
Solubility in Water:SOLUBLE
Appearance and Odor:LYOPHILIZED POWDER
Percent Volatiles by Volume:SOLID

MAY CONTAIN SODIUM AZIDE.AVOID PROLONGED CONTACT W/ METALS
(LEAD,COPPER,ETC) AS EXPLOSIVE METAL AZIDES CAN BE FORMED.
Stability Condition to Avoid:REFRIGERATE TO RETAIN PRODUCT INTEGRITY.NO
HAZARDOUS MATERIALS ARE EXPECTED UPON DEGRADATION.
Hazardous Decomposition Products:COMBUSTION MAY PRODUCE CARBON DIOXIDE
& CARBON MONOXIDE.DUE TO LIMITED QUANTITIES,SHOULD NOT POSE A
HEALTH HAZARD.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/ FEDERAL,STATE
& LOCAL REGULATIONS .WASTE REAGENTS MAY BE RELEASED TO MUNICIPAL
WASTE WATER FACILITIES W/ PLENTY OF H*2O.ASSAY SOLN MAY NEED TO BE
HANDLED AS INF ECTIOUS WASTE AS HUMAN FLUIDS ARE BEINGASSAYED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.